Descaler for heating elements 1 litre en ligne maintenant

Descaler for water heaters and wall mounted boilers

FIELD OF APPLICATION

Descaling of water heaters and wall mounted boilers.

The HEATER BODY DECOOLER is designed for all models of descaling pumps.

USE

The product is concentrated: dilution from 1 to 10 according to the scaling but can also be used pure. It can be used several times. Replace it when it loses its effectiveness.

Pour the product into the tank of the descaling pump. After descaling, rinse the descaled system thoroughly.

The HEAT BODY DETARTRANT can be used on stainless steel, in which case it is advisable to use our NEUTRALIZER 11N after descaling to stop the effect of the product.

If the descaling pump is used and the circuit to be descaled is heavily clogged with limescale (low flow rate), it is advisable to dilute the product: 1 volume of DETARTRANT and 9 volumes of water.

This way, there will be no limescale build-up that cannot be removed by a worn-out, low-flow pump. With this method, descaling will take longer.

SECURITY

R34 Causes burns.

R37 Irritating to respiratory system.

S2 Keep out of reach of children.

S26 In case of contact with eyes, wash

immediately and abundantly with

water and consult a specialist.

S36/37/39 Wear protective clothing

gloves, and a respirator.

eye/face protection.

S45 In case of accident or illness,

seek medical attention immediately (if

possible to show him the label).

S51 Use the product in a ventilated area.

Contains hydrochloric acid.

ENVIRONMENT

Biodegradable product at more than 95 %.

Recyclable packaging.