Gebsicone G1 translucent : Silicone sealant pas cher

Gebsicone G1 translucent : Silicone sealant GEB – 891251

• 310 ml cartridge
• Silicone sealant for glazing, metal construction

Functionality:
Silicone sealant, low modulus elastomer, neutral/alkoxy type, cross-linking with contact with ambient humidity :

• Installation of single and double glazing.
• Realization of glass joints (butt joint, overlap, …).
• Glass/glass, glass/aluminium, glass/plastic, glass/wood, aluminium/aluminium assembly.
• Waterproofing of metal constructions (curtain walls, aluminium profiles, etc.).

Implementation:

Preparation:

• The work must be carried out in accordance with DTU 39 / NFP78 201.
• Glass, tiles: degreasing with alcohol followed by wiping with a clean cloth.
• Metals, aluminium: same cleaning as above.
• Plastics: Same cleaning as above but with a solvent recommended by the manufacturer.
• Generally speaking, the surfaces must be sound, dry, dust-free and free of grease.

Instructions for use :

• Install compression joints (foam backer rod) if necessary and masking tapes to obtain a clean application.
• Apply the sealant with a manual or pneumatic gun (no reheating is necessary).
• Tighten and smooth the joint with a wet spatula to press the sealant against the side surfaces
• Remove the masking tape.
• The cleaning of the material is best done with white spirit before the sealant dries or by scraping after hardening.

Consumption :

Depending on the dimensions of the joint, a 310 ml cartridge will allow to realize (the length of the joint is

expressed in meters) :

Cleaning of equipment :

• The cleaning of the material is best done with white spirit before the sealant dries or by scraping after hardening.

Storage:

• Store at a temperature between +5°C and +30°C.
• At 20°C, the shelf life of the product in its original closed packaging, protected from moisture, is 18 months.

Observations:

• Not recommended on metal surfaces that may oxidize, porous materials and on treated glass without a preliminary test.

Product benefits :

• Excellent adhesion without primer on most non-porous substrates (glass, anodized aluminum)
• Withstands extreme temperatures: from -40°C to +140°C
• Unchangeable

Advice from the Pro:

• A cartridge of G1 gebsicone allows you to make a joint of 2 meters with a depth of 10mm and a width of 15mm

Technical specifications :